distributor/sparking issues

[PARR]

1) try anto - see post above - he says he has some spares - whether that included distributor I don't know.
2) Go to Honda dealer with Chassis number - should be able to order one, or just ask them for a distributor for the engine you have - B20* for older steppys or K20* for i-VTEC, later steppys.

[PARR]

Addition to above - Vantastic may know - he seems to know more of the nitti-gritti about steppys.

[Vantastic]

Addition to above - Vantastic may know - he seems to know more of the nitti-gritti about steppys.

So I am famous! Well I did make a suggestion on Page 1 !

[schmee]

All this time and hard work, the problem stemmed from a faulty oil pump, it wasnt pumping oil to the top half of the block, the cams were running dry and ended up ripping the engine to bits, and oil pump, distributor, cylinder head and cambelt kit later and hopefully she will run smoothly for a good few years to come!

[Vantastic]

Ah .. a problem solved and a few lessons learned! Hope all is well now and the steppy is running smoothly.