What size of alloy wheel do i need

What size of alloy wheel do i need

Postby stockdale » Wed Feb 17, 2010 6:01 pm

Hi, I have a 2001 RF3 Stepwagon. It has 15" steel wheels, the current wheel trims look poor, and needs lots of cable ties to hold them on, so I would like to fit a basic set of alloy wheels.

Most websites don't list the stepwagon, so can someone please tell me what size i need, and where i am best to go to get some. Also will my current tyres fit alloys, or will i also have to buy new tyres?

Many thanks

Jane
stockdale
 
Posts: 2
Joined: Wed Feb 17, 2010 5:55 pm

Re: What size of alloy wheel do i need

Postby Vantastic » Thu Feb 18, 2010 12:13 am

Hi Jane

Have a read of this thread (see link below) It really needs moving into this section. We still have steelies on ours but this is to avoid costly alloy damage as one of us is not so good at parking (no confessions here!) :lol:

http://www.stepwagonclub.com/forums/viewtopic.php?f=4&t=32

This should tell you all you need to know but ask if it doesn't!

Cheers

Lewis :D

PS Welcome to the RF3 club - ours is a 2002 model which we love. It is still in 8 seat mode, not a camper conversion, as we need ... the seats! :shock:
Loving the Steppy! ... my other car is also Vantastic!
User avatar
Vantastic
 
Posts: 282
Joined: Sat Jan 24, 2009 7:54 pm
Location: On a hill overlooking the trent valley!

Re: What size of alloy wheel do i need

Postby Scrap » Fri Feb 19, 2010 10:45 am

Hi Jane

I've just had a look at the tyres on the alloys on my 2001 RF3 and they're 195/65R15.

I bought some generic Honda locking wheel nuts on ebay (not that my alloys look worth stealing).

Brian
Scrap
 
Posts: 75
Joined: Sat Aug 15, 2009 4:27 pm

Re: What size of alloy wheel do i need

Postby PAR » Mon Oct 18, 2010 9:12 pm

Alloy wheels for stepwgn would be "5 1/2 JJ 15", tyres 195/65 15
Worth getting the Stepwgn handbook from the shop - gives you most of what is needed.
PAR
 
Posts: 18
Joined: Fri Sep 03, 2010 1:02 pm

Re: What size of alloy wheel do i need

Postby anto1231 » Wed Nov 03, 2010 3:30 am

dosent really matter as long as they fit 114.3 pcd mines on 245x40x18 lowerd 50mm uprated springs on gas adjustable dampers looking to upgrade to 19 inch or 20 inch by end of year handles like it on rails 15 inch are ok as standard but like like your on a day boat and gonna tip sideways lol
anto1231
 
Posts: 52
Joined: Wed Apr 07, 2010 3:15 pm

Re: What size of alloy wheel do i need

Postby Vantastic » Wed Nov 03, 2010 9:23 pm

Make sure you read this post: http://www.stepwagonclub.com/forums/viewtopic.php?f=4&t=32

Cheers

Lewis
Loving the Steppy! ... my other car is also Vantastic!
User avatar
Vantastic
 
Posts: 282
Joined: Sat Jan 24, 2009 7:54 pm
Location: On a hill overlooking the trent valley!


Return to Suspension / chassis / steering / brakes / wheels

Who is online

Users browsing this forum: No registered users and 1 guest


cron